Node Whitewolf #12715

active

Administrator: thestalker
Location: Delft
CTWUG
-33.961, 18.68
Created: 04/19/15
Installation Due Date: 0000-01-01 00:00:00

Ips
172.26.144.104/29 	Whitewolf 	172.26.144.104 to 172.26.144.110 


/ip address add address=172.26.144.110/32 network=172.26.145.247 broadcast=172.26.145.247 interface=wlan1 comment="PTP Link to Highsite"
/ip address add address=172.26.144.110/29 interface=ether1 comment="LAN Range"
/ip route add dst-address=172.16.0.0/12 gateway=172.26.145.247 comment="Route to WUG"



Your adapter settings in windows should look something like:
IP Address	172.26.144.105
Subnet	255.255.255.240
Gateway	172.26.144.110
Primary DNS	172.18.1.1
Secondary DNS	8.8.8.8 (or whatever DNS you got from your ISP)

If you want to add a static route open command prompt as administrator and run the following command:

route add 172.16.0.0 mask 255.240.0.0 172.26.144.110 -p

Line of Sight (LOS) Tools

List topology to all AP nodes

List topology to all nodes

IP C-Classes

C Class	Date	Status

IPv6 Networks

IPv6 Net	Date	Status

DNS zones

Zone name	Date	Status

Nameservers (NS)

Nameserver name	IP address	Date	Status

Links

Access Point [SSID: http.//ctwug.za.net/Whitewolf_AP1 ]

Link type	Status	Created	Due Date	Protocol	SSID	Channel	Frequency (Mhz)	Equipment
Access Point	Active	07/25/17	11/30/99	IEEE 802.11n Dual chain	http.//ctwug.za.net/Whitewolf_AP1	20mhz	5500	omnitik

Info

Clients

Node	Status	Distance

Free Links

Node subnetwork

Added	Hostname	IP address	Device type	Always on-line (24/7)
04/19/15	pc1	172.26.130.145	PC	Yes
08/09/17	pc2	172.26.130.146	PC	Yes
08/16/16	laptop	172.26.130.147	PC	Yes
04/19/15	rb1	172.26.130.150	Router	Yes

Services

Category	IP address	Info	Status	Added

Node's View