Node Whitewolf #12715
active
Ips 172.26.144.104/29 Whitewolf 172.26.144.104 to 172.26.144.110 /ip address add address=172.26.144.110/32 network=172.26.145.247 broadcast=172.26.145.247 interface=wlan1 comment="PTP Link to Highsite" /ip address add address=172.26.144.110/29 interface=ether1 comment="LAN Range" /ip route add dst-address=172.16.0.0/12 gateway=172.26.145.247 comment="Route to WUG" Your adapter settings in windows should look something like: IP Address 172.26.144.105 Subnet 255.255.255.240 Gateway 172.26.144.110 Primary DNS 172.18.1.1 Secondary DNS 8.8.8.8 (or whatever DNS you got from your ISP) If you want to add a static route open command prompt as administrator and run the following command: route add 172.16.0.0 mask 255.240.0.0 172.26.144.110 -p Line of Sight (LOS) GereedschapIP C-Classes
IPv6 Networks
DNS zones
Nameservers (NS)
|
|
||||||||||||||||||||||||||||||||||||||
Verbindingen
Free Verbindingen |
|||||||||||||||||||||||||||||||||||||||
Node subnetwerk
|
|||||||||||||||||||||||||||||||||||||||
Diensten
|
|||||||||||||||||||||||||||||||||||||||
Nodes Bekijken |