Node Gforce5 #15571

Beheerder

Gino076 Bericht

Ironman
CTWUG
-33.9497, 18.6858

Aangemaakt

07/01/16

Installation Due Date

2016-07-01 14:46:39

Note: I assume your wireless interface is wlan1 and your primary ethernet interface is ether1.
In winbox open a new terminal and paste the following commands ...

/ip address add address=172.18.73.134/32 network=172.18.72.253 broadcast=172.18.72.253 interface=wlan1 comment="PTP Link to Highsite"
/ip address add address=172.18.73.134/29 interface=ether1 comment="LAN Range"
/ip route add dst-address=172.16.0.0/12 gateway=172.18.72.253 comment="Route to WUG"



Your adapter settings in windows should look something like:
IP Address	172.18.73.129
Subnet	255.255.255.248
Gateway	172.18.73.134
Primary DNS	172.18.1.1
Secondary DNS	8.8.8.8 (or whatever DNS you got from your ISP)

If you want to add a static route open command prompt as administrator and run the following command:

route add 172.16.0.0 mask 255.240.0.0 172.18.73.134 -p

NEW Future ips::

Note: I assume your wireless interface is wlan1 and your primary ethernet interface is ether1.
In winbox open a new terminal and paste the following commands ...

/ip address add address=172.26.153.174/32 network=172.26.153.27 broadcast=172.26.153.27 interface=wlan1 comment="PTP Link to Highsite"
/ip address add address=172.26.153.174/29 interface=ether1 comment="LAN Range"
/ip route add dst-address=172.16.0.0/12 gateway=172.26.153.27 comment="Route to WUG"



Your adapter settings in windows should look something like:
IP Address	172.26.153.169
Subnet	255.255.255.248
Gateway	172.26.153.174
Primary DNS	172.18.1.1
Secondary DNS	8.8.8.8 (or whatever DNS you got from your ISP)

If you want to add a static route open command prompt as administrator and run the following command:

route add 172.16.0.0 mask 255.240.0.0 172.26.153.174 -p