Node easy506thbob #15576

Administrator

easy506thbob Contact

Location

Graphire
CTWUG
-33.8878, 18.6911

Created

07/04/16

Installation Due Date

2016-07-04 09:48:44

172.18.201.0/29 	easy506thbob 	172.18.201.0 	1-6 	172.18.201.7 	M3ph 

Note: I assume your wireless interface is wlan1 and your primary ethernet interface is ether1.
In winbox open a new terminal and paste the following commands ...

/ip address add address=172.18.201.6/32 network=172.18.201.226 broadcast=172.18.201.226 interface=wlan1 comment="PTP Link to Highsite"
/ip address add address=172.18.201.6/29 interface=ether1 comment="LAN Range"
/ip route add dst-address=172.16.0.0/12 gateway=172.18.201.226 comment="Route to WUG"



Your adapter settings in windows should look something like:
IP Address	172.18.201.1
Subnet	255.255.255.248
Gateway	172.18.201.6
Primary DNS	172.18.1.1
Secondary DNS	8.8.8.8 (or whatever DNS you got from your ISP)

If you want to add a static route open command prompt as administrator and run the following command:

route add 172.16.0.0 mask 255.240.0.0 172.18.201.6 -p