Node Booger #15921

active

Administrator: Ironman
Location: Nowires
CTWUG
-33.8296, 18.7193
Created: 10/05/16
Installation Due Date: 2016-10-05 10:22:56

IP Range==172.26.30.104/29
/ip address add address=172.26.30.110/32 network=172.26.30.250 broadcast=172.26.30.250 interface=wlan1 comment="PTP Link to Highsite"
/ip address add address=172.26.30.110/29 interface=ether1 comment="LAN Range"
/ip route add dst-address=172.16.0.0/12 gateway=172.26.30.250 comment="Route to WUG"



Your adapter settings in windows should look something like:
IP Address	172.26.30.105
Subnet	255.255.255.248
Gateway	172.26.30.110
Primary DNS	172.18.1.1
Secondary DNS	8.8.8.8 (or whatever DNS you got from your ISP)

If you want to add a static route open command prompt as administrator and run the following command:

route add 172.16.0.0 mask 255.240.0.0 172.26.30.110 -p

Line of Sight (LOS) Tools

List topology to all AP nodes

List topology to all nodes

IP C-Classes

C Class	Date	Status

IPv6 Networks

IPv6 Net	Date	Status

DNS zones

Zone name	Date	Status

Nameservers (NS)

Nameserver name	IP address	Date	Status

+−

Backbone
Access Point
Clients
Not linked

Links

Coms (#2229)

Link type	Created	Due Date	SSID	Protocol	Channel	Frequency (Mhz)	Equipment	Status
Backbone	03/09/18	11/30/99		IEEE 802.11n Dual chain		5500	2X 2.4sxts	Active

Info

Booger #15921 #2229 Coms

-- 0.662km --

Free Links

Node subnetwork

Added	Hostname	IP address	Device type	Always on-line (24/7)
03/24/18	pc1	172.26.30.105	PC	Yes
03/25/18	pc2	172.26.30.106	PC	Yes
03/25/18	pc3	172.26.30.107	PC	Yes
03/10/18	pc4	172.26.30.108	PC	Yes
03/10/18	pc5	172.26.30.109	PC	Yes
03/10/18	rb1	172.26.30.110	Router	Yes

Services

Category	IP address	Info	Status	Added

Node's View