Node Crankshaft #16081

active

Administrator: Crankshaft
Location: Ironman
CTWUG
-33.8976, 18.6922
Created: 11/18/16
Installation Due Date: 2016-11-21 19:41:08

0836498119
Heinieb80@gmail.com


/ip address add address=172.26.156.54/32 network=172.26.156.2 broadcast=172.26.156.2 interface=wlan1 comment="PTP Link to Highsite"
/ip address add address=172.26.156.54/29 interface=ether1 comment="LAN Range"
/ip route add dst-address=172.16.0.0/12 gateway=172.26.156.2 comment="Route to WUG"



Your adapter settings in windows should look something like:
IP Address	172.26.156.49
Subnet	255.255.255.248
Gateway	172.26.156.54
Primary DNS	172.18.1.1
Secondary DNS	8.8.8.8 (or whatever DNS you got from your ISP)

If you want to add a static route open command prompt as administrator and run the following command:

route add 172.16.0.0 mask 255.240.0.0 172.26.156.54 -p

Line of Sight (LOS) Tools

List topology to all AP nodes

List topology to all nodes

IP C-Classes

C Class	Date	Status

IPv6 Networks

IPv6 Net	Date	Status

DNS zones

Zone name	Date	Status

Nameservers (NS)

Nameserver name	IP address	Date	Status

Links

Luigi (#5922)

Link type	Created	Due Date	SSID	Protocol	Channel	Frequency (Mhz)	Equipment	Status
Client	02/24/17	11/30/99	http://ctwug.za.net/Luigi-Omni-1	IEEE 802.11n Dual chain		5500		Active

Info

Crankshaft #16081 #5922 Luigi

-- 2.082km --

Free Links

Node subnetwork

Added	Hostname	IP address	Device type	Always on-line (24/7)
01/28/17	pc1	172.26.156.49	PC	Yes
01/28/17	pc2	172.26.156.50	PC	Yes
01/28/17	rb1	172.26.156.54	Router	Yes

Services

Category	IP address	Info	Status	Added

Node's View