Node morocco #16533
active
IPS:: 172.26.152.216/29 Morocco 172.26.152.217 to 172.26.152.222 Note: I assume your wireless interface is wlan1 and your primary ethernet interface is ether1. In winbox open a new terminal and paste the following commands ... /ip address add address=172.26.152.222/32 network=172.26.152.13 broadcast=172.26.152.13 interface=wlan1 comment="PTP Link to Highsite" /ip address add address=172.26.152.222/29 interface=ether1 comment="LAN Range" /ip route add dst-address=172.16.0.0/12 gateway=172.26.152.13 comment="Route to WUG" Your adapter settings in windows should look something like: IP Address 172.26.152.217 Subnet 255.255.255.248 Gateway 172.26.152.222 Primary DNS 172.18.1.1 Secondary DNS 8.8.8.8 (or whatever DNS you got from your ISP) If you want to add a static route open command prompt as administrator and run the following command: route add 172.16.0.0 mask 255.240.0.0 172.26.152.222 -p Line of Sight (LOS) ToolsIP C-Classes
IPv6 Networks
DNS zones
Nameservers (NS)
|
|
||||||||||||||||||||||||||||||||||||||
LinksFree Links |
|||||||||||||||||||||||||||||||||||||||
Node subnetwork
|
|||||||||||||||||||||||||||||||||||||||
Services
|
|||||||||||||||||||||||||||||||||||||||
Node's View |