Node Arno #17197

Administrator

Spaffy Contact

Location

Ironman
CTWUG
-33.9412, 18.7021

Created

11/01/17

Installation Due Date

2017-11-01 07:48:55

172.26.152.56/29 	Arno 	172.26.152.57 to 172.26.152.62 

Note: I assume your wireless interface is wlan1 and your primary ethernet interface is ether1.
In winbox open a new terminal and paste the following commands ...

/ip address add address=172.26.152.62/32 network=172.26.152.12 broadcast=172.26.152.12 interface=wlan1 comment="PTP Link to Highsite"
/ip address add address=172.26.152.62/29 interface=ether1 comment="LAN Range"
/ip route add dst-address=172.16.0.0/12 gateway=172.26.152.12 comment="Route to WUG"



Your adapter settings in windows should look something like:
IP Address	172.26.152.57
Subnet	255.255.255.248
Gateway	172.26.152.62
Primary DNS	172.18.1.1
Secondary DNS	8.8.8.8 (or whatever DNS you got from your ISP)

If you want to add a static route open command prompt as administrator and run the following command:

route add 172.16.0.0 mask 255.240.0.0 172.26.152.62 -p