Κόμβος Arno #17197
active
172.26.152.56/29 Arno 172.26.152.57 to 172.26.152.62 Note: I assume your wireless interface is wlan1 and your primary ethernet interface is ether1. In winbox open a new terminal and paste the following commands ... /ip address add address=172.26.152.62/32 network=172.26.152.12 broadcast=172.26.152.12 interface=wlan1 comment="PTP Link to Highsite" /ip address add address=172.26.152.62/29 interface=ether1 comment="LAN Range" /ip route add dst-address=172.16.0.0/12 gateway=172.26.152.12 comment="Route to WUG" Your adapter settings in windows should look something like: IP Address 172.26.152.57 Subnet 255.255.255.248 Gateway 172.26.152.62 Primary DNS 172.18.1.1 Secondary DNS 8.8.8.8 (or whatever DNS you got from your ISP) If you want to add a static route open command prompt as administrator and run the following command: route add 172.16.0.0 mask 255.240.0.0 172.26.152.62 -p Οπτική επαφή (LOS) ΕργαλείαIP C-Classes
IPv6 Networks
Ζώνες DNS
Nameservers (NS)
|
|
|||||||||||||||||||||||||||||||
ΔιασυνδέσειςΕλεύθερες Διασυνδέσεις |
||||||||||||||||||||||||||||||||
Το δίκτυο του κόμβου
|
||||||||||||||||||||||||||||||||
Υπηρεσίες
|
||||||||||||||||||||||||||||||||
Η οπτική του κόμβου |