Node Dribbel 2.0 #17677

Beheerder

Ironman Bericht

Ironman
CTWUG
-33.932, 18.6809

Aangemaakt

05/20/18

Installation Due Date

2018-05-20 09:50:00

Ips::172.26.151.208/29 	Dribbel2.0 	172.26.151.209 to 172.26.151.214

or to Ironman
172.26.150.128/29 	Dribbel2.0 	172.26.150.129 to 172.26.150.134
IP Address	172.26.150.129
Subnet	255.255.255.248
Gateway	172.26.150.134
Primary DNS	172.18.1.1
Secondary DNS	8.8.8.8 (or whatever DNS you got from your ISP)


Note: I assume your wireless interface is wlan1 and your primary ethernet interface is ether1.
In winbox open a new terminal and paste the following commands ...

/ip address add address=172.26.151.214/32 network=172.26.151.58 broadcast=172.26.151.58 interface=wlan1 comment="PTP Link to Highsite"
/ip address add address=172.26.151.214/29 interface=ether1 comment="LAN Range"
/ip route add dst-address=172.16.0.0/12 gateway=172.26.151.58 comment="Route to WUG"



Your adapter settings in windows should look something like:
IP Address	172.26.151.209
Subnet	255.255.255.248
Gateway	172.26.151.214
Primary DNS	172.18.1.1
Secondary DNS	8.8.8.8 (or whatever DNS you got from your ISP)

If you want to add a static route open command prompt as administrator and run the following command:

route add 172.16.0.0 mask 255.240.0.0 172.26.151.214 -p