Κόμβος Kenpachi #5135

Διαχειριστής

Kenpachi Αποστολή μηνύματος

Τοποθεσία

Belhar
CTWUG
-33.9483, 18.6346

Δημιουργήθηκε

10/24/11

Εκτιμώμενη ημ/νια Εγκατάστασης

0000-00-00 00:00:00

RB433 + R52Hn
27Dbi

172.18.112.200/29


Note: I assume your wireless interface is wlan1 and your primary ethernet interface is ether1.
In winbox open a new terminal and paste the following commands ...

/ip address add address=172.18.41.206/32 network=172.18.40.174 broadcast=172.18.40.174 interface=wlan1 comment="PTP Link to Highsite"
/ip address add address=172.18.41.206/29 interface=ether1 comment="LAN Range"
/ip route add dst-address=172.16.0.0/12 gateway=172.18.40.174 comment="Route to WUG"



Your adapter settings in windows should look something like:
IP Address	172.18.112.201
Subnet	255.255.255.248
Gateway	172.18.112.206
Primary DNS	172.18.1.1
Secondary DNS	8.8.8.8 (or whatever DNS you got from your ISP)

If you want to add a static route open command prompt as administrator and run the following command:

route add 172.16.0.0 mask 255.240.0.0 172.18.41.206 -p