Node Boesman #6452

active

Administrator: Renierjvv
Location: Ironman
CTWUG
-33.9089, 18.6775
Created: 06/28/12
Installation Due Date: 0000-01-01 00:00:00

RouterBOARD DynaDish G-5HacD

172.26.156.32/28

Note: I assume your wireless interface is wlan1 and your primary ethernet interface is ether1.
In winbox open a new terminal and paste the following commands ...

/ip address add address=172.26.156.46/32 network=172.26.156.2 broadcast=172.26.156.2 interface=wlan1 comment="PTP Link to Highsite"
/ip address add address=172.26.156.46/28 interface=ether1 comment="LAN Range"
/ip route add dst-address=172.16.0.0/12 gateway=172.26.156.2 comment="Route to WUG"



Your adapter settings in windows should look something like:
IP Address	172.26.156.33
Subnet	255.255.255.240
Gateway	172.26.156.46
Primary DNS	172.18.1.1
Secondary DNS	8.8.8.8 (or whatever DNS you got from your ISP)

If you want to add a static route open command prompt as administrator and run the following command:

route add 172.16.0.0 mask 255.240.0.0 172.26.156.46 -p

Line of Sight (LOS) Tools

List topology to all AP nodes

List topology to all nodes

IP C-Classes

C Class	Date	Status

IPv6 Networks

IPv6 Net	Date	Status

DNS zones

Zone name	Date	Status

Nameservers (NS)

Nameserver name	IP address	Date	Status

Links

Luigi (#5922)

Link type	Created	Due Date	SSID	Protocol	Channel	Frequency (Mhz)	Equipment	Status
Client	11/09/15	11/30/99	http://ctwug.za.net/Luigi-Omni-1	IEEE 802.11n Dual chain		5500	RouterBOARD DynaDish G-5HacD	Active

Info

Boesman #6452 #5922 Luigi

-- 1.674km --

Free Links

Node subnetwork

Added	Hostname	IP address	Device type	Always on-line (24/7)	Info
11/09/15	boesmants01	172.26.156.33	Server	Yes	Download Server
01/05/16	boesmanfw02	172.26.156.34	Server	Yes
11/09/15	rb1	172.26.156.46	Router	Yes

Services

Category	IP address	Info	Status	Added

Node's View