Logo
Login / Register

Node RiaanX #9730

active
Administrator
Ironman
Location
Ironman
CTWUG
-33.9316, 18.6806
Created
02/04/14
Installation Due Date
0000-01-01 00:00:00
172.26.151.160/29 	RiaanX 	172.26.151.161 to 172.26.151.166 	172.26.151.167 	6 
or to Ironman
172.26.150.144/29......172.26.150.145 to 172.26.150.150
IP Address	172.26.150.145
Subnet	255.255.255.248
Gateway	172.26.150.150
Primary DNS	172.18.1.1
Note: I assume your wireless interface is wlan1 and your primary ethernet interface is ether1.
In winbox open a new terminal and paste the following commands ...

/ip address add address=172.26.151.166/32 network=172.26.151.61 broadcast=172.26.151.61 interface=wlan1 comment="PTP Link to Highsite"
/ip address add address=172.26.151.166/29 interface=ether1 comment="LAN Range"
/ip route add dst-address=172.16.0.0/12 gateway=172.26.151.61 comment="Route to WUG"



Your adapter settings in windows should look something like:
IP Address	172.26.151.161
Subnet	255.255.255.248
Gateway	172.26.151.166
Primary DNS	172.18.1.1
Secondary DNS	8.8.8.8 (or whatever DNS you got from your ISP)

If you want to add a static route open command prompt as administrator and run the following command:

route add 172.16.0.0 mask 255.240.0.0 172.26.151.166 -p


IP C-Classes

C Class Date Status

IPv6 Networks

IPv6 Net Date Status

DNS zones

Zone name Date Status

Nameservers (NS)

Nameserver name IP address Date Status

Links


Free Links

Node subnetwork

Subnet Home LAN (172.26.150.145 - 172.26.150.150)
Added Hostname IP address MAC address Device type Always on-line (24/7) Info
07/22/19 pc1 172.26.150.145 PC Yes
07/22/19 pc2 172.26.150.146 PC Yes
07/22/19 pc3 172.26.150.147 PC Yes
07/22/19 pc4 172.26.150.148 PC Yes
07/22/19 pc5 172.26.150.149 PC Yes
07/22/19 rb1 172.26.150.150 Router Yes

Services

Category IP address Info Status Added

Node's View