Logo
Inloggen / Registreren

Node RiaanX #9730

active
Beheerder
Ironman
Ironman
CTWUG
-33.9316, 18.6806
Aangemaakt
02/04/14
Installation Due Date
0000-01-01 00:00:00
172.26.151.160/29 	RiaanX 	172.26.151.161 to 172.26.151.166 	172.26.151.167 	6 
or to Ironman
172.26.150.144/29......172.26.150.145 to 172.26.150.150
IP Address	172.26.150.145
Subnet	255.255.255.248
Gateway	172.26.150.150
Primary DNS	172.18.1.1
Note: I assume your wireless interface is wlan1 and your primary ethernet interface is ether1.
In winbox open a new terminal and paste the following commands ...

/ip address add address=172.26.151.166/32 network=172.26.151.61 broadcast=172.26.151.61 interface=wlan1 comment="PTP Link to Highsite"
/ip address add address=172.26.151.166/29 interface=ether1 comment="LAN Range"
/ip route add dst-address=172.16.0.0/12 gateway=172.26.151.61 comment="Route to WUG"



Your adapter settings in windows should look something like:
IP Address	172.26.151.161
Subnet	255.255.255.248
Gateway	172.26.151.166
Primary DNS	172.18.1.1
Secondary DNS	8.8.8.8 (or whatever DNS you got from your ISP)

If you want to add a static route open command prompt as administrator and run the following command:

route add 172.16.0.0 mask 255.240.0.0 172.26.151.166 -p


IP C-Classes

C Class Datum Status

IPv6 Networks

IPv6 Net Date Status

DNS zones

Zone naam Datum Status

Nameservers (NS)

Nameserver naam IP adres Datum Status

Verbindingen


Free Verbindingen

Node subnetwerk

Subnet Thuis netwerk (LAN) (172.26.150.145 - 172.26.150.150)
Toegevoegd Hostname IP adres MAC adres Apparaat type Altijd aanwezig (24/7) Informatie
07/22/19 pc1 172.26.150.145 Computer Ja
07/22/19 pc2 172.26.150.146 Computer Ja
07/22/19 pc3 172.26.150.147 Computer Ja
07/22/19 pc4 172.26.150.148 Computer Ja
07/22/19 pc5 172.26.150.149 Computer Ja
07/22/19 rb1 172.26.150.150 Router Ja

Diensten

Categorie IP adres Informatie Status Toegevoegd

Nodes Bekijken