Node RiaanX #9730

Beheerder

Ironman Bericht

Ironman
CTWUG
-33.9316, 18.6806

Aangemaakt

02/04/14

Installation Due Date

0000-01-01 00:00:00

172.26.151.160/29 	RiaanX 	172.26.151.161 to 172.26.151.166 	172.26.151.167 	6 
or to Ironman
172.26.150.144/29......172.26.150.145 to 172.26.150.150
IP Address	172.26.150.145
Subnet	255.255.255.248
Gateway	172.26.150.150
Primary DNS	172.18.1.1
Note: I assume your wireless interface is wlan1 and your primary ethernet interface is ether1.
In winbox open a new terminal and paste the following commands ...

/ip address add address=172.26.151.166/32 network=172.26.151.61 broadcast=172.26.151.61 interface=wlan1 comment="PTP Link to Highsite"
/ip address add address=172.26.151.166/29 interface=ether1 comment="LAN Range"
/ip route add dst-address=172.16.0.0/12 gateway=172.26.151.61 comment="Route to WUG"



Your adapter settings in windows should look something like:
IP Address	172.26.151.161
Subnet	255.255.255.248
Gateway	172.26.151.166
Primary DNS	172.18.1.1
Secondary DNS	8.8.8.8 (or whatever DNS you got from your ISP)

If you want to add a static route open command prompt as administrator and run the following command:

route add 172.16.0.0 mask 255.240.0.0 172.26.151.166 -p