Node Rostro #13455

active

Administrator: Ironman
Location: Ironman
CTWUG
-33.9357, 18.6905
Created: 07/09/15
Installation Due Date: 0000-01-01 00:00:00

Note: I assume your wireless interface is wlan1 and your primary ethernet interface is ether1.
In winbox open a new terminal and paste the following commands ...

/ip address add address=172.26.153.78/32 network=172.26.153.27 broadcast=172.26.153.27 interface=wlan1 comment="PTP Link to Highsite"
/ip address add address=172.26.153.78/28 interface=ether1 comment="LAN Range"
/ip route add dst-address=172.16.0.0/12 gateway=172.26.153.27 comment="Route to WUG"



Your adapter settings in windows should look something like:
IP Address	172.26.153.65
Subnet	255.255.255.240
Gateway	172.26.153.78
Primary DNS	172.18.1.1
Secondary DNS	8.8.8.8 (or whatever DNS you got from your ISP)

If you want to add a static route open command prompt as administrator and run the following command:

route add 172.16.0.0 mask 255.240.0.0 172.26.153.78 -p

Line of Sight (LOS) Tools

List topology to all AP nodes

List topology to all nodes

IP C-Classes

C Class	Date	Status

IPv6 Networks

IPv6 Net	Date	Status

DNS zones

Zone name	Date	Status

Nameservers (NS)

Nameserver name	IP address	Date	Status

Links

Spaffy (#11547)

Link type	Created	Due Date	SSID	Protocol	Channel	Frequency (Mhz)	Equipment	Status
Client	07/31/20	11/30/99	http://ctwug.za.net/SpaffyOmni	IEEE 802.11n Dual chain		5500		Active

Info

Rostro #13455 #11547 Spaffy

-- 0.81km --

Free Links

Node subnetwork

Added	Hostname	IP address	Device type	Always on-line (24/7)
12/09/16	pc1	172.26.153.65	PC	Yes
12/09/16	pc2	172.26.153.66	PC	Yes
12/09/16	pc3	172.26.153.67	PC	Yes
12/09/16	rb1	172.26.153.78	Router	Yes

Services

Category	IP address	Info	Status	Added

Node's View