Node S60 #17883

Beheerder

Ironman Bericht

Ironman
CTWUG
-33.9322, 18.6807

Aangemaakt

08/05/18

Installation Due Date

2018-08-05 12:58:55

172.18.115.144/29 	S60 	172.18.115.145 172.18.115.150

 Note: I assume your wireless interface is wlan1 and your primary ethernet interface is ether1.
In winbox open a new terminal and paste the following commands ...

/ip address add address=172.18.115.150/32 network=172.18.115.75 broadcast=172.18.115.75 interface=wlan1 comment="PTP Link to Highsite"
/ip address add address=172.18.115.150/29 interface=ether1 comment="LAN Range"
/ip route add dst-address=172.16.0.0/12 gateway=172.18.115.75 comment="Route to WUG"



Your adapter settings in windows should look something like:
IP Address	172.18.115.145
Subnet	255.255.255.248
Gateway	172.18.115.150
Primary DNS	172.18.1.1
Secondary DNS	8.8.8.8 (or whatever DNS you got from your ISP)

If you want to add a static route open command prompt as administrator and run the following command:

route add 172.16.0.0 mask 255.240.0.0 172.18.115.150 -p