Node BladeSD #18112

active

Beheerder: Ironman
: Ironman
CTWUG
-33.9324, 18.6793
Aangemaakt: 12/14/18
Installation Due Date: 2018-12-31 00:00:00

172.18.115.48/29 	BladeSD 	172.18.115.49 to 172.18.115.54 

Note: I assume your wireless interface is wlan1 and your primary ethernet interface is ether1.
In winbox open a new terminal and paste the following commands ...

/ip address add address=172.18.115.54/32 network=172.18.115.72 broadcast=172.18.115.72 interface=wlan1 comment="PTP Link to Highsite"
/ip address add address=172.18.115.54/29 interface=ether1 comment="LAN Range"
/ip route add dst-address=172.16.0.0/12 gateway=172.18.115.72 comment="Route to WUG"



Your adapter settings in windows should look something like:
IP Address	172.18.115.49
Subnet	255.255.255.248
Gateway	172.18.115.54
Primary DNS	172.18.1.1
Secondary DNS	8.8.8.8 (or whatever DNS you got from your ISP)

If you want to add a static route open command prompt as administrator and run the following command:

route add 172.16.0.0 mask 255.240.0.0 172.18.115.54 -p

Line of Sight (LOS) Gereedschap

Lijst topologie alle AP knooppunten

Lijst topologie alle knooppunten

IP C-Classes

C Class	Datum	Status

IPv6 Networks

IPv6 Net	Date	Status

DNS zones

Zone naam	Datum	Status

Nameservers (NS)

Nameserver naam	IP adres	Datum	Status

Verbindingen

Snot (#8736)

Verbinding type	Aangemaakt	Due Date	SSID	Protocol	Kanaal	Frequency (Mhz)	Apparatuur	Status
Backbone	01/13/19	11/30/99	http://ctwug.za.net/Snot2	IEEE 802.11n Dual chain		5500		Actief

Informatie

BladeSD #18112 #8736 Snot

-- 0.128km --

Free Verbindingen

Node subnetwerk

Toegevoegd	Hostname	IP adres	Apparaat type	Altijd aanwezig (24/7)
01/13/19	pc1	172.18.115.49	Computer	Ja
01/13/19	pc2	172.18.115.50	Computer	Ja
01/22/19	pc3	172.18.115.51	Computer	Ja
01/22/19	pc4	172.18.115.52	Computer	Ja
01/22/19	pc5	172.18.115.53	Computer	Ja
01/13/19	rb1	172.18.115.54	Router	Ja

Diensten

Categorie	IP adres	Informatie	Status	Toegevoegd

Nodes Bekijken