Node spanner #3690

Beheerder

Ironman Bericht

Ironman
CTWUG
-33.9084, 18.6613

Aangemaakt

03/24/11

Installation Due Date

0000-01-01 00:00:00

Ips:
172.26.158.208/28 	Spanner 	172.26.158.209 to 172.26.158.222 	172.26.158.223 	14 	ACTIVE 	ironman 	WeankeyRb9 

Note: I assume your wireless interface is wlan1 and your primary ethernet interface is ether1.
In winbox open a new terminal and paste the following commands ...

/ip address add address=172.26.158.222/32 network=172.26.158.22 broadcast=172.26.158.22 interface=wlan1 comment="PTP Link to Highsite"
/ip address add address=172.26.158.222/28 interface=ether1 comment="LAN Range"
/ip route add dst-address=172.16.0.0/12 gateway=172.26.158.22 comment="Route to WUG"

Your adapter settings in windows should look something like:
IP Address	172.26.158.209
Subnet	255.255.255.240
Gateway	172.26.158.222
Primary DNS	172.18.1.1
Secondary DNS	8.8.8.8 (or whatever DNS you got from your ISP)

If you want to add a static route open command prompt as administrator and run the following command:

route add 172.16.0.0 mask 255.240.0.0 172.26.158.222 -p