IPS''''
172.26.158.48/28 Powerhouse 172.26.158.49 to 172.26.158.62
Note: I assume your wireless interface is wlan1 and your primary ethernet interface is ether1.
In winbox open a new terminal and paste the following commands ...
/ip address add address=172.26.158.62/32 network=172.26.158.26 broadcast=172.26.158.26 interface=wlan1 comment="PTP Link to Highsite"
/ip address add address=172.26.158.62/28 interface=ether1 comment="LAN Range"
/ip route add dst-address=172.16.0.0/12 gateway=172.26.158.26 comment="Route to WUG"
Your adapter settings in windows should look something like:
IP Address 172.26.158.49
Subnet 255.255.255.240
Gateway 172.26.158.62
Primary DNS 172.18.1.1
Secondary DNS 8.8.8.8 (or whatever DNS you got from your ISP)
If you want to add a static route open command prompt as administrator and run the following command:
route add 172.16.0.0 mask 255.240.0.0 172.26.158.62 -p