Node CyborgZa #8473

active

Administrator: Ironman
Location: Ironman
CTWUG
-33.939, 18.7087
Created: 06/12/13
Installation Due Date: 0000-01-01 00:00:00



/ip address add address=172.26.152.78/32 network=172.26.152.13 broadcast=172.26.152.13 interface=wlan1 comment="PTP Link to Highsite"
/ip address add address=172.26.152.78/28 interface=ether1 comment="LAN Range"
/ip route add dst-address=172.16.0.0/12 gateway=172.26.152.13 comment="Route to WUG"



Your adapter settings in windows should look something like:
IP Address	172.26.152.65
Subnet	255.255.255.240
Gateway	172.26.152.78
Primary DNS	172.18.1.1
Secondary DNS	8.8.8.8 (or whatever DNS you got from your ISP)

If you want to add a static route open command prompt as administrator and run the following command:

route add 172.16.0.0 mask 255.240.0.0 172.26.152.78 -p

Line of Sight (LOS) Tools

List topology to all AP nodes

List topology to all nodes

IP C-Classes

C Class	Date	Status

IPv6 Networks

IPv6 Net	Date	Status

DNS zones

Zone name	Date	Status

Nameservers (NS)

Nameserver name	IP address	Date	Status

Links

Spaffy (#11547)

Link type	Created	Due Date	SSID	Protocol	Channel	Frequency (Mhz)	Equipment	Status
Client	06/12/13	11/30/99	http://ctwug.za.net/SpaffyOmni	IEEE 802.11n Dual chain		5500		Active

Info

CyborgZa #8473 #11547 Spaffy

-- 1.062km --

Free Links

Node subnetwork

Added	Hostname	IP address	Device type	Always on-line (24/7)
06/29/16	pc1	172.26.152.65	PC	Yes
06/29/16	pc2	172.26.152.66	PC	Yes
06/29/16	rb2	172.26.152.77	Router	Yes
06/29/16	rb1	172.26.152.78	Router	Yes

Services

Category	IP address	Info	Status	Added

Node's View