Node PlantonHome #8833

Administrator

plankton1 Contact

Location

Ironman
CTWUG
-33.9312, 18.7036

Created

08/07/13

Installation Due Date

0000-01-01 00:00:00

172.26.151.192/29 	Planton 	172.26.151.193 to 172.26.151.198 	172.26.151.199 	6 

Note: I assume your wireless interface is wlan1 and your primary ethernet interface is ether1.
In winbox open a new terminal and paste the following commands ...

/ip address add address=172.26.151.198/32 network=172.26.151.109 broadcast=172.26.151.109 interface=wlan1 comment="PTP Link to Highsite"
/ip address add address=172.26.151.198/29 interface=ether1 comment="LAN Range"
/ip route add dst-address=172.16.0.0/12 gateway=172.26.151.109 comment="Route to WUG"



Your adapter settings in windows should look something like:
IP Address	172.26.151.193
Subnet	255.255.255.248
Gateway	172.26.151.198
Primary DNS	172.18.1.1
Secondary DNS	8.8.8.8 (or whatever DNS you got from your ISP)

If you want to add a static route open command prompt as administrator and run the following command:

route add 172.16.0.0 mask 255.240.0.0 172.26.151.198 -p

NEW ROUTES''''
Note: I assume your wireless interface is wlan1 and your primary ethernet interface is ether1.
In winbox open a new terminal and paste the following commands ...

/ip address add address=172.26.155.110/32 network=172.26.155.252 broadcast=172.26.155.252 interface=wlan1 comment="PTP Link to Highsite"
/ip address add address=172.26.155.110/28 interface=ether1 comment="LAN Range"
/ip route add dst-address=172.16.0.0/12 gateway=172.26.155.252 comment="Route to WUG"



Your adapter settings in windows should look something like:
IP Address	172.26.155.97
Subnet	255.255.255.240
Gateway	172.26.155.110
Primary DNS	172.18.1.1
Secondary DNS	8.8.8.8 (or whatever DNS you got from your ISP)

If you want to add a static route open command prompt as administrator and run the following command:

route add 172.16.0.0 mask 255.240.0.0 172.26.155.110 -p