Κόμβος DEAD-NEW #1869

Διαχειριστής

DEAD-NEW Αποστολή μηνύματος

Τοποθεσία

Ironman
CTWUG
-33.9319, 18.7039

Δημιουργήθηκε

03/16/10

Εκτιμώμενη ημ/νια Εγκατάστασης

0000-01-01 00:00:00

Mikrotik 5.8Ghz Hn SXT
RB911 with 21dBi UBNT Sector with RF Shield

172.26.151.96/28 	DEAD-New 	172.26.151.97 to 172.26.151.110 	172.26.151.111 	14 

Note: I assume your wireless interface is wlan1 and your primary ethernet interface is ether1.
In winbox open a new terminal and paste the following commands ...

/ip address add address=172.26.151.110/32 network=172.26.151.22 broadcast=172.26.151.22 interface=wlan1 comment="PTP Link to Highsite"
/ip address add address=172.26.151.110/28 interface=ether1 comment="LAN Range"
/ip route add dst-address=172.16.0.0/12 gateway=172.26.151.22 comment="Route to WUG"



Your adapter settings in windows should look something like:
IP Address	172.26.151.97
Subnet	255.255.255.240
Gateway	172.26.151.110
Primary DNS	172.18.1.1
Secondary DNS	8.8.8.8 (or whatever DNS you got from your ISP)

If you want to add a static route open command prompt as administrator and run the following command:

route add 172.16.0.0 mask 255.240.0.0 172.26.151.110 -p
NEW ROUTES''''
Note: I assume your wireless interface is wlan1 and your primary ethernet interface is ether1.
In winbox open a new terminal and paste the following commands ...

/ip address add address=172.26.155.94/32 network=172.26.155.252 broadcast=172.26.155.252 interface=wlan1 comment="PTP Link to Highsite"
/ip address add address=172.26.155.94/28 interface=ether1 comment="LAN Range"
/ip route add dst-address=172.16.0.0/12 gateway=172.26.155.252 comment="Route to WUG"



Your adapter settings in windows should look something like:
IP Address	172.26.155.81
Subnet	255.255.255.240
Gateway	172.26.155.94
Primary DNS	172.18.1.1
Secondary DNS	8.8.8.8 (or whatever DNS you got from your ISP)

If you want to add a static route open command prompt as administrator and run the following command:

route add 172.16.0.0 mask 255.240.0.0 172.26.155.94 -p